Dell Networking 7048 Reference Manual page 470

show green-mode
Use the show green-mode
to display the green-mode configuration and operational status of the port.
This command is also used to display the per port configuration and
operational status of the green-mode. The status is shown only for the modes
supported on the corresponding hardware platform whether enabled or
disabled.
Syntax
show green-mode
Parameter Description
Parameter
interface-id
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
This command output provides the following information.
Term
Energy-detect
admin mode
Energy-detect
operational status
470
Green Ethernet Commands
interface-id
interface-id
interface-id
Description
Any valid interface. See
interface representation.
Description
Energy Detect
Energy-detect mode is enabled or disabled.
Energy detect mode is currently active or inactive. The energy
detect mode may be administratively enabled, but the
operational status may be inactive. The reasons for the
operational status are described below.
command in Privileged EXEC mode
Interface Naming Conventions for