Show Dhcp L2Relay Interface - Dell Networking 7048 Reference Manual

VLAN Id L2 Relay
--------- ----------
3
5
6
7
8
9
10

show dhcp l2relay interface

Use the show dhcp l2relay interface command in Privileged EXEC mode to
display DHCP L2 Relay configuration specific to interfaces.
Syntax
show dhcp l2relay interface {all |
Parameter Description
Parameter
all
interface-id
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
CircuitId
----------- ------------
Disabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
interface-id
Description
Show all interfaces.
A physical interface.
RemoteId
Enabled --NULL--
Enabled --NULL--
Enabled broadcom
Disabled --NULL--
Disabled --NULL--
Disabled --NULL--
Disabled --NULL--
}
DHCP Layer 2 Relay Commands
351