Show Ip Igmp-Proxy - Dell Networking 7048 Reference Manual

show ip igmp-proxy

Use the show ip igmp-proxy command in Privileged EXEC mode to display a
summary of the host interface status parameters. It displays status parameters
only when IGMP Proxy is enabled.
Syntax
show ip igmp-proxy
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays a summary of the host interface status
parameters.
console#show ip igmp-proxy
Interface Index............................... vlan13
Admin Mode.................................... Enable
Operational Mode.............................. Enable
Version....................................... 3
Number of Multicast Groups.................... 0
Unsolicited Report Interval................... 1
Querier IP Address on Proxy Interface......... 0.0.0.0
Older Version 1 Querier Timeout............... 0
Older Version 2 Querier Timeout............... 0
984
IGMP Proxy Commands