Dvlan-Tunnel Ethertype - Dell Networking 7048 Reference Manual

protocol vlan group switchport access
protocol vlan group
all
Private VLAN Commands
switchport private-
vlan
switchport mode
private-vlan

dvlan-tunnel ethertype

Use the dvlan-tunnel ethertype command in Global Configuration mode to
enable the configuration of the inner and outer VLAN tag ethertype.
To configure the EtherType to its default value, use the no form of this
command.
Syntax
dvlan-tunnel ethertype {802.1Q | vman | custom
no dvlan-tunnel ethertype
Parameter Description
Parameter
802.1Q
vman
custom
primary-tpid
vlan
switchport general
forbidden vlan
private-vlan
–
Description
Configures the EtherType as 0x8100.
Configures the EtherType as 0x88A8
Configures a custom EtherType for the DVLAN tunnel. The
value must be 0-65535.
Globally configures the tag protocol identifier on the outer
VLAN tag (S-TAG). If this parameter is not given, the inner
vlan (C-TAG) is configured.
vlan (Global
Config)
vlan association
mac
show interfaces
switchport
–
0-65535 [primary-tpid] }
VLAN Commands
show vlan private-vlan–
–
show vlan private-vlan
–
809