Lldp Transmit; Lldp Transmit-Mgmt - Dell Networking 7048 Reference Manual

lldp transmit

Use the lldp transmit command in Interface Configuration mode to enable
the LLDP advertise (transmit) capability. To disable local data transmission,
use the no form of this command.
Syntax
lldp transmit
no lldp transmit
Default Configuration
LLDP is enabled on all supported interfaces.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how enable the transmission of local data.
console(config-if-1/0/3)#lldp transmit

lldp transmit-mgmt

Use the lldp transmit-mgmt command in Interface Configuration mode to
include transmission of the local system management address information in
the LLDPDUs. To cancel inclusion of the management information, use the
no form of this command.
Syntax
lldp transmit-mgmt
no lldp transmit-mgmt
599
LLDP Commands