Dell Networking 7048 Reference Manual page 670

Syntax
conform-color { class-map-name} [ exceed-color { class-map-name } ]
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
Color conforming classes must be one of the following types:
• Primary COS
• Secondary COS
• DSCP
• IP Precedence
This includes both the input and color aware classes. The conform color class
may not be the same as the input class, nor may the match criteria be of the
same type. The input class map may have a match type of "any."
The exceed color class may only be specified for the two-rate police
algorithm.
Example
The following example uses a simple policer to color TCP packets that exceed
an average rate of 1000 Kbps or a burst size of 16 Kbytes as red. Conforming
packets are colored green. The example configuration below also shows the
configuration of WRED drop thresholds and probabilities for colored traffic.
console(config)#class-map match-all class-ipv4 ipv4
console(config-classmap)#match any
console(config-classmap)#exit
console(config)#class-map match-all class-cos1 ipv4
console(config-classmap)#match cos 1
console(config-classmap)#exit
670
QoS Commands