Example
The following example sets the multicast router present expiration time on
VLAN 2 to 60 seconds.
console(config)#ip igmp snooping report suppression vlan 10
ip igmp snooping unregistered floodall
This command enables flooding of unregistered multicast traffic to all ports
in the VLAN. Use the no form of this command to only flood unregistered
multicast traffic to router ports.
Syntax
ip igmp snooping unregistered floodall
no ip igmp snooping unregistered floodall
Default Configuration
Unregistered multicast traffic is only flooded to router ports by default.
Command Mode
Global Configuration mode.
User Guidelines
This command is not available on the M6220. On the M6220, unregistered
multicast traffic is always flooded to all ports in the VLAN. There is no
equivalent MLD command since this setting applies to both protocols.
Example
console(config)#ip igmp snooping unregistered floodall
ip igmp snooping vlan mrouter
This command statically configures a port as connected to a multicast router
for a specified VLAN. Use the no form of this command to remove the static
binding.
500
IGMP Snooping Commands