Dell Networking 7048 Reference Manual page 472

Term
Tw_sys_rx Echo
(μSec)
Fallback Tw_sys
(μSec)
Remote Tw_sys_tx
(μSec)
Remote Tw_sys
Echo (μSec)
Remote Tw_sys_rx
(μSec)
Remote Tw_sys_rx
Echo (μSec)
Remote Fallback
Tw_sys (μSec)
Tx_dll_enabled
Tx_dll_ready
Rx_dll_enabled
Rx_dll_ready
Power Saving (%)
472
Green Ethernet Commands
Description
Integer that indicates the remote systems Receive Tw_sys that
was used by the local system to compute the Tw_sys that it can
support. This value maps into the
aLldpXdot3LocRxTwSysEcho attribute.
Integer that indicates the value of fallback Tw_sys that the local
system requests from the remote system. This value is updated
by the local system software.
Integer that indicates the value of Tw_sys that the remote
system can support. This value maps from the
aLldpXdot3RemTxTwSys attribute.
Integer that indicates the value Transmit Tw_sys echoed back
by the remote system. This value maps from the
aLldpXdot3RemTxTwSysEcho attribute.
Integer that indicates the value of Tw_sys that the remote
system requests from the local system. This value maps from
the aLldpXdot3RemRxTwSys attribute.
Integer that indicates the value of Receive Tw_sys echoed back
by the remote system. This value maps from the
aLldpXdot3RemRxTwSysEcho attribute.
Integer that indicates the value of fallback Tw_sys that the
remote system is advertising.This attribute maps to the variable
RemFbSystemValue as defined in 78.4.2.3.
Initialization status of the EEE transmit Data Link Layer
management function on the local system.
Data Link Layer ready: This variable indicates that the tx
system initialization is complete and is ready to update/receive
LLDPDU containing EEE TLV. This variable is updated by the
local system software.
Status of the EEE capability negotiation on the local system.
Data Link Layer ready: This variable indicates that the rx
system initialization is complete and is ready to update/receive
LLDPDU containing EEE TLV. This variable is updated by the
local system software.
Percentage of Power saved by enabling EEE on the interface
since EEE counters are last cleared.