Dell Networking 7048 Reference Manual page 1162

Syntax
area area-id virtual-link router-id
hello-interval seconds
[
seconds dead-interval seconds
] [
digest-key key-id md5 key
area area-id virtual-link router-id
no
hello-interval
[
authentication-key
[[
Parameter Description
Parameter
area-id
router-id
authentication
message-digest
null
hello-interval
seconds
dead-interval
seconds
retransmit-interval
seconds
transmit-delay
seconds
md5
key
key-id
1162
OSPF Commands
retransmit-interval seconds
] [
]]
retransmit-interval
] [
message-digest-key
] | [
Description
Identifies the OSPF stub area to configure. (Range: IP address
or decimal from 0-4294967295)
Valid IP address.
Specifies authentication type.
Specifies that message-digest authentication is used.
No authentication is used. Overrides password or message-
digest authentication if configured for the area.
Number of seconds to wait before sending hello packets to the
OSPF virtual interface. (Range: 1–65535)
Number of seconds to wait before the OSPF virtual interface on
the virtual interface is assumed to be dead. (Range: 1–65535)
The number of seconds to wait between retransmitting LSAs if
no acknowledgement is received. (Range: 0–3600)
Number of seconds to increment the age of the LSA before
sending, based on the estimated time it takes to transmit from
the interface. (Range: 0–3600)
Use MD5 Encryption for an OSPF Virtual Link.
Authentication key for the specified interface. (Range: 8 bytes
or less if the authentication type is simple and 16 bytes or less if
the type is encrypt.)
Authentication key identifier for the authentication type
encrypt. (Range: 0–255)
authentication
[
authentication-key key
] [[
authentication
[
transmit-delay
] [
]]
message-digest
[
transmit-delay
] [
message-
] | [
message-digest
[
dead-interval
] [
null
| ]]
null
| ]]
]