Dell Networking 7048 Reference Manual page 715

Parameter
Intf Shaping Rate
Queue Mgmt Type
Queue
Minimum Bandwidth
Scheduler Type
show interfaces random-detect
Use the show interfaces random-detect command in Privileged EXEC mode
to display WRED policy on an interface.
Syntax
show interfaces random-detect
Parameter Description
Parameter
interface-id
Default Configuration
This command has no default configuration.
Description
The maximum transmission bandwidth limit for
the interface as a whole. It is independent of any
per-queue maximum bandwidth values in effect
for the interface. This value is a configured value.
The queue depth management technique used for
all queues on this interface.
An interface supports
n
( -1).The specific
Internal egress queue of the interface; queues 0–6
are available.
The minimum transmission bandwidth guarantee
for the queue, expressed as a percentage. A value of
0 means bandwidth is not guaranteed and the
queue operates using best-effort scheduling. This
value is a configured value.
Indicates whether this queue is scheduled for
transmission using a strict priority or a weighted
scheme. This value is a configured value.
interface-id
Description
Specify an interface type. Valid interfaces include physical ports
and port channels.
n
queues numbered 0 to
n
value is platform-dependent.
QoS Commands
715