Show Isdp Entry - Dell Networking 7048 Reference Manual

Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show isdp
Timer................................ 30
Hold Time............................ 180
Version 2 Advertisements............. Enabled
Neighbors table last time changed.... 0 days 00:06:01
Device ID............................ QTFMPW82400020
Device ID format capability.......... Serial Number
Device ID format..................... Serial Number

show isdp entry

The show isdp entry command displays ISDP entries. If a device id specified,
then only the entry about that device is displayed.
Syntax
show isdp entry {all |
Parameter Description
Parameter
all
deviceid
338
CDP Interoperability Commands
deviceid
}
Description
Show ISDP settings for all devices.
The device ID associated with a neighbor.