Show Mac Address-Table Dynamic - Dell Networking 7048 Reference Manual

Secure addresses: 1
Dynamic addresses: 97
Internal addresses: 9

show mac address-table dynamic

Use the show mac address-table command in User EXEC or Privileged EXEC
mode to display all dynamic entries in the bridge-forwarding database.
Syntax
show mac address-table dynamic [address
id vlan-id
] [vlan
Parameter Description
Parameter
mac-address
interface-id
vlan-id
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
In this example, all dynamic entries in the mac address-table are displayed.
console#show mac address-table dynamic
]
Description
A MAC address with the format xxxx.xxxx.xxxx.
Display information for a specific interface. Valid interfaces
include physical ports and port channels.
Display entries for the specific VLAN only. The range is 1 to
4093.
mac-address
] [interface
Address Table Commands
interface-
319