Show Statistics - Dell Networking 7048 Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
Port channels are only displayed if configured. Use the
channel command to display configured and unconfigured port channels.
Interfaces configured as stacking ports will show as detached in the output of
show interfaces status
the
Example
The following example displays the status for all configured interfaces.
console#show interfaces status
Port Description
------- --------------
Tel/0/1
Tel/0/2
Tel/0/3 phone port

show statistics

Use the show statistics command in Privileged EXEC mode to display
detailed statistics for a specific port or for the entire switch.
Syntax
show statistics {gigabitethernet unit/slot/port |switchport | port-channel
port-channel-number | tengigabitethernet unit/slot/port }
430
Ethernet Configuration Commands
command.
Duplex Speed
------ -------
N/A Unknown
N/A Unknown
N/A Unknown
show interfaces port-
Neg Link Flow Control
State Status
---- ----- ------------
Auto Down Inactive
Auto Down Inactive
Auto Down Inactive