Show Ip Route Preferences - Dell Networking 7048 Reference Manual

E1 - OSPF External Type 1, E2 - OSPF External
Type 2
N1 - OSPF NSSA External Type 1, N2 - OSPF NSSA
External Type 2
IP Routing Commands 1009
Default Gateway is not configured
S 10.0.0.0/8 [1/0] via 1.2.3.5

show ip route preferences

Use the show ip route preferences command in Privileged EXEC mode
displays detailed information about the route preferences. Route preferences
are used in determining the best route. Lower router preference values are
preferred over higher router preference values.
The user can configure a global default gateway using the ip default-gateway
command, creating a default route with a preference of 253. The show ip
route preferences command lists the new preference value. The show
command also displays the preference of default routes learned from a DHCP
server.
Syntax
show ip route preferences
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
1028
IP Routing Commands