Manual Aggregation Of Lags; Flexible Assignment Of Ports To Lags; Commands In This Chapter; Channel-Group - Dell Networking 7048 Reference Manual

Manual Aggregation of LAGs

PowerConnect switching supports the manual addition and deletion of links
to aggregates.

Flexible Assignment of Ports to LAGs

Assignment of interfaces to dynamic LAGs is based upon a maximum of 144
interfaces assigned to dynamic LAGs, a maximum of 128 dynamic LAGs and
a maximum of 8 interfaces per dynamic LAG. For example, 128 LAGs may be
assigned 2 interfaces each or 18 LAGs may be assigned 8 interfaces each.

Commands in this Chapter

This chapter explains the following commands:

channel-group

interface port-channel
interface range port-channel
hashing-mode
lacp port-priority
lacp system-priority
channel-group
Use the channel-group command in Interface Configuration mode to
associate a port with a port channel. To remove the channel-group
configuration from the interface, use the no form of this command.
Syntax
port-channel-number
channel-group
no channel-group
port-channel-number — Number of a valid port-channel with which to
•
associate the current interface.
• on — Forces the port to join a channel without LACP (static LAG).
lacp timeout
port-channel local-preference
port-channel min-links
show interfaces port-channel
show lacp
show statistics port-channel
mode {on | active}
Port Channel Commands
637