Hardware-Address; Domain-Name (Ip Dhcp Pool Config) - Dell Networking 7048 Reference Manual

domain-name (IP DHCP Pool Config)

Use the domain-name command in IP DHCP Pool Configuration mode to
set the DNS domain name which is provided to a DHCP client by the DHCP
server. The DNS name is an alphanumeric string up to 255 characters in
length. Use the no form of the command to remove the domain name.
Syntax
domain
domain-name
no domain-name
domain — DHCP domain name. (Range: 1–255 characters)
•
Default Configuration
This command has no default configuration.
Command Mode
IP DHCP Pool Configuration mode

hardware-address

Use the hardware-address command in DHCP Pool Configuration mode to
specify the MAC address of a client to be manually assigned an address. Use
the no form of the command to remove the MAC address assignment.
Syntax
hardware-address
no hardware-address
Parameter Description
Parameter
hardware-address
domain
hardware-address
Description
MAC address of the client. Either the XXXX.XXXX.XXXX or
XX:XX:XX:XX:XX:XX form of MAC address may be used where
XX is a hexadecimal digit.
DHCP Server and Relay Agent Commands
913