Show Mac Address-Table Count - Dell Networking 7048 Reference Manual

---- -------------- -------- -------------
1 0000.E26D.2C2A Dynamic

show mac address-table count

Use the show mac address-table count command in User EXEC or Privileged
EXEC mode to display the number of addresses present in the Forwarding
Database.
Syntax
show mac address-table count [vlan
Parameter Description
Parameter
interface-id
vlan-id
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the addresses in the Forwarding Database:
console#show mac address-table count
Capacity: 8192
Used: 109
Static addresses: 2
318
Address Table Commands
Description
Specify an interface type; valid interfaces include physical ports
and port channels.
Specify a valid VLAN, the range is 1 to 4093.
1/0/1
vlan-id
| interface
interface-id
]