Dell Networking 7048 Reference Manual page 711

Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
console#show diffserv service interface gigabitethernet 1/0/1 in
DiffServ Admin Mode........................... Enable
Interface..................................... 1/0/1
Direction..................................... In
No policy is attached to this interface in this direction.
show diffserv service interface port-channel
Syntax Description
show diffserv service interface port-channel
Parameter Description
Parameter
channel-group
in
out
Default Configuration
This command has no default configuration.
Description
A valid port-channel in the system. (Range: 1–18)
Show ingress policies.
Show egress policies.
channel-group
{in|out}
QoS Commands
711