Service-Acl Input - Dell Networking 7048 Reference Manual

Command Mode
Global Configuration mode
User Guidelines
Command fails if the new name is the same as the old one.
Example
The following example shows the mac access-list extended rename
command.
console(config)#mac access-list extended rename DELL1 DELL2

service-acl input

Use the service-acl input command in Interface Configuration mode to block
Link Local Protocol Filtering (LLPF) protocol(s) on a given port. Use the no
form of this command to unblock link-local protocol(s) on a given port.
Syntax
service-acl input {blockcdp | blockvtp | blockdtp | blockudld | blockpagp |
blocksstp | blockall}
no service-acl input
Parameter Description
Parameter
blockcdp
blockvtp
blockdtp
blockudld
blockpagp
blocksstp
blockall
302
ACL Commands
Description
To block CDP PDU's from being forwarded.
To block VTP PDU's from being forwarded.
To block DTP PDU's from being forwarded.
To block UDLD PDU's from being forwarded.
To block PAgP PDU's from being forwarded.
To block SSTP PDU's from being forwarded.
To block all the PDU's with MAC of 01:00:00:0c:cc:cx (x-don't
care) from being forwarded.