Dcb Enable; Lldp Med - Dell Networking 7048 Reference Manual

dcb enable

This command enables the sending of DCBX information in LLDP frames.
Syntax Description
dcb enable
no dcb enable
Command Mode
Global Config mode
Default Value
The sending of DCBX information in enabled by default.
Usage Guidelines
Use this command to disable the sending of DCBX information when it is
desirable to utilize legacy QoS and disable the automatic configuration of
CNAs based on transmitted DCBX information.
Example
console(config)#no dcb enable

lldp med

This command is used to enable/disable LLDP-MED on an interface. By
enabling MED, the transmit and receive functions of LLDP are effectively
enabled.
Syntax Description
lldp med
no lldp med
Parameter Ranges
Not applicable
592
LLDP Commands