Classofservice Trust - Dell Networking 7048 Reference Manual

IP DSCP
58
59
60
61
62
63
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays mapping for IP DSCP 1 and traffic class 2.
console(config)#classofservice ip-dscp-mapping 1 2

classofservice trust

Use the classofservice trust command in either Global Configuration mode
or Interface Configuration mode to set the class of service trust mode of an
interface. To set the interface mode to untrusted, use the no form of this
command.
Syntax
classofservice trust {dot1p | untrusted | ip-dscp}
no classofservice trust
• dot1p — Specifies that the mode be set to trust dot1p (802.1p) packet
markings.
untrusted — Sets the Class of Service Trust Mode for all interfaces to
•
Untrusted.
668
QoS Commands
Traffic Class
3
3
3
3
3
3