Dell Networking 7048 Reference Manual page 1088

Syntax
show ipv6 mld groups {
group-address — The group address to display.
•
vlan-id — A valid VLAN id.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
The following fields are displayed as a table when vlan
Field
Number of (*, G)
entries
Number of (S, G)
entries
Group Address
Interface
Uptime
Expiry Time
vlan-id
If vlan
multicast group and each interface:
Field
Group Address
Interface
1088
IPv6 Routing Commands
group-address
Description
Displays the number of groups present in the MLD Table.
Displays the number of include and exclude mode sources
present in the MLD Table.
The address of the multicast group.
Interface through which the multicast group is reachable.
Time elapsed in seconds since the multicast group has been
known.
Time left in seconds before the entry is removed from the
MLD membership table.
is not specified, the following fields are displayed for each
Description
The address of the multicast group.
Interface through which the multicast group is reachable.
vlan-id
| vlan }
vlan-id
is specified: