Ping Ipv6 - Dell Networking 7048 Reference Manual

ping ipv6

Use ping ipv6 command in Privileged EXEC mode to determine whether
another computer is on the network. To use the command, configure the
switch for network (in-band) connection. The source and target devices must
have the ping utility enabled and running on top of TCP/IP . The switch can
be pinged from any IP workstation with which the switch is connected
through the default VLAN (VLAN 1), as long as there is a physical path
between the switch and the workstation. The terminal interface sends three
pings to the target station.
Syntax
ip-address
ping ipv6 {
ipv6-address — Target IPv6 address to ping.
•
hostname — Hostname to ping (contact). (Range: 1–158 characters). The
•
command allows spaces in the host name when specified in double quotes.
For example, console(config)#ping ipv6 "host name"
size — Size of the datagram. (Range: 48–2048 bytes)
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example determines whether another computer is on the
network at the IPv6 address specified.
console#ping ipv6 2030:1::1/64
Send count=3, Receive count=0 from 2030:1::1/64
Average round trip time = 0.00 ms
hostname
| } [size
size
]
IPv6 Routing Commands
1081