Dell Networking 7048 Reference Manual page 1018

Syntax Description
Parameter
type
number
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes
User Guidelines
The Method field contains one of the following values.
Field
DHCP
Manual
Example
console(config-if)#show ip interface
Default Gateway................................ 0.0.0.0
L3 MAC Address..........................
Routing Interfaces:
Interface
----------
Vl1
The following examples display all IP information and information specific to
VLAN 2.
1018
IP Routing Commands
Description
Interface type (loopback, out-of-band, or vlan)
Interface number. Valid only for loopback and VLAN types.
Description
The address is leased from a DHCP server.
The address is manually configured.
State IP Address
----- --------------- --------------- -------
Down 0.0.0.0
IP Mask
0.0.0.0
Method
None