Show Ip Arp Inspection Vlan - Dell Networking 7048 Reference Manual

VLAN Forwarded
---- ---------
10 90
20 10
console#show ip arp inspection statistics vlan 10,20
VLAN DHCP
Drops
---- ---------- ---------- ---------- ---------- ---------- ---------- ------
10 11
20 1

show ip arp inspection vlan

Use the show ip arp inspection vlan command to display the Dynamic ARP
Inspection configuration on all the VLANs in the given VLAN range. It also
displays the global configuration values for source MAC validation,
destination MAC validation and invalid IP validation.
Syntax
show ip arp inspection vlan [
Parameter Description
Parameter
vlan-range
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
The following global parameters are displayed:
Dropped
-------
14
3
ACL DHCP
Drops Permits
1
0
vlan-range
Description
A valid VLAN range.
ACL Bad Src
Permits
65 25
8 2
]
Dynamic ARP Inspection Commands
Bad Dest
MAC MAC
1 1
0 1
Invalid
IP
0
1
393