show statistics switchport
Use the show statistics command in Privileged EXEC mode to display
detailed statistics for a specific port or for the entire switch.
Syntax
show statistics {
Parameter Description
Parameter
interface-id
switchport
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
It is possible to enter interface configuration mode from global configuration
mode or from interface configuration mode.
Example
The following example shows statistics for the entire switch.
console#show statistics switchport
Total Packets Received (Octets)................ 0
Packets Received Without Error................. 0
Unicast Packets Received....................... 0
Multicast Packets Received..................... 0
434
Ethernet Configuration Commands
interface-id
|switchport}
Description
Interface id. See
representation.
Displays statistics for the entire switch.
Interface Naming Conventions
for interface