Login Authentication - Dell Networking 7048 Reference Manual

Keyword
radius
tacacs
Default Configuration
The local user database is checked. This action has the same effect as the
command ip https authentication local.
Command Mode
Global Configuration mode
User Guidelines
The additional methods of authentication are used only if the previous
method returns an error, not if it fails. To ensure that the authentication
succeeds even if all methods return an error, specify none as the final method
in the command line. If none is specified as an authentication method after
radius, no authentication is used if the RADIUS server is down.
When TACACS+ is used as the authentication method for HTTP/HTTPS,
the Cisco ACS must be configured to allow the shell service. In addition, for
admin privileges, the privilege level attribute must be set to 15.
Example
The following example configures https authentication.
console(config)# ip https authentication radius local

login authentication

Use the login authentication command in Line Configuration mode to
specify the login authentication method list for a line (console, telnet, or
SSH). To return to the default specified by the authentication login
command, use the no form of this command.
Syntax
login authentication {default |
no login authentication
Source or destination
Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS+ servers for authentication.
list-name
}
AAA Commands
263