Ethernet Cfm Mep Active - Dell Networking 7048 Reference Manual

User Guidelines
The maintenance domain must exist for it to be enabled.
Example
The following example enables a maintenance endpoint at level 1 with mpid
1010 on vlan 10.
console(config-if-Gi1/0/3)#ethernet cfm mep enable
level 1 vlan 10 mpid 1010

ethernet cfm mep active

Use the ethernet cfm mep active command in Interface Configuration mode
to activate a MEP at the specified level and direction. Use the no form of the
command to deactivate the MEP.
Syntax
ethernet cfm mep active level
Parameter Description
Parameter
level
mpid
vlan
Default Configuration
No MEPs are preconfigured.
Command Mode
Interface Configuration
User Guidelines
This command has no user guidelines.
0-7
vlan
Description
Maintenance association level
Maintenance entity identifier
VLAN on which the MEP operates
1-4093 1-8191
mpid
Ethernet CFM Commands
451