Switchport Protected Name - Dell Networking 7048 Reference Manual

switchport protected name

Use the switchport protected name command in Global Configuration mode
to adds the port to the protected group 1 and also sets the group name to
"protected".
Syntax
switchport protected
no switchport protected
groupid — Identifies which group the port is to be protected in.
•
(Range: 0–2)
name — Name of the group. (Range: 0-32 characters)
•
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example assigns the name "protected" to group 1.
console(config-if-1/0/1)#switchport protected 1 name protected
groupid name
name
groupid
name
Ethernet Configuration Commands
443