Dell Networking 7048 Reference Manual page 1213

• ls-id — Specifies the link state ID (LSID). (Range: IP address or an integer
in the range of 0–4294967295)
• adv-router — Display the LSAs that are restricted by the advertising
router. To specify a router, enter the IP address of the router.
• self-originate — Display the LSAs in that are self-originated.
• opaque-area— Display the area opaque LSAs.
• opaque-as— Display AS opaque LSAs.
• opaque-link— Display link opaque LSAs.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
Information is only displayed if OSPF is enabled.
Example
The following example displays information about the link state database
when OSPF is enabled.
console#show ip ospf database
Link Id
--------------- --------------- ----- -------- ------ ------- -----
5.2.0.0
5.2.0.0
20.20.20.20
Router Link States (Area 0.0.0.0)
Adv Router
0.0.0.0
5.2.0.0
20.20.20.20
Network Link States (Area 0.0.0.0)
Age Sequence Chksm
1360 80000006 3a1f
1360 80000009 a47e
1165 8000000b 0f80
OSPF Commands
Options Rtr Opt
------ -----
------ ---E-
-E---- -----
1213