network
Use the network command in IP DHCP Pool Configuration mode to define a
pool of IPv4 addresses for distributing to clients.
Syntax
network-number
network
Parameter Description
Parameter
network-number
mask
prefix-length
Default Configuration
This command has no default configuration.
Command Mode
IP DHCP Pool Configuration mode
next-server
Use the next-server command in DHCP Pool Configuration mode to set the
IPv4 address of the TFTP server to be used during auto-install. Use the no
form of the command to remove the next server configuration.
Syntax
ip-address
next-server
no next-server
922
DHCP Server and Relay Agent Commands
mask
prefix-length
[
|
Description
A valid IPv4 address
A valid IPv4 network mask with contiguous left-aligned bits.
An integer indicating the number of leftmost bits in the
network-number to use as a prefix for allocating cells.
]