Lease - Dell Networking 7048 Reference Manual

lease

Use the lease command in DHCP Pool Configuration mode to set the period
for which a dynamically assigned DHCP address is valid. Use the infinite
parameter to indicate that addresses are to be automatically assigned. Use the
no form of the command to return the lease configuration to the default. Use
the show ip dhcp pool
Use the show ip dhcp binding
leased IP address.
Syntax
days hours
lease { [
no lease
Parameter Description
Parameter
days
hours
minutes
infinite
Default Configuration
The default is a 1 day lease.
Command Mode
DHCP Pool Configuration mode
User Guidelines
This command has no user guidelines.
command to display pool configuration parameters.
command to display the expiration time of the
minutes
][ ]|infinite}
Description
The number of days for the lease duration. Range 0-59. Default
is 1.
The number of hours for the lease duration. Range 0-23. There
is no default.
The number of minutes for the lease duration. Range 0-59.
There is no default.
The lease does not expire.
DHCP Server and Relay Agent Commands
919