Ipv6 Mld Snooping Vlan Mcrtexpiretime - Dell Networking 7048 Reference Manual

User Guidelines
This command has no user guidelines.
Example
console(config)#ipv6 mld snooping vlan 2 last-
listener-query-interval 7

ipv6 mld snooping vlan mcrtexpiretime

The ipv6 mld snooping mcrtexpiretime command sets the Multicast Router
Present Expiration time. The time is set for a particular interface or VLAN.
This is the amount of time in seconds that a switch waits for a query to be
received on an interface before the interface is removed from the list of
interfaces with multicast routers attached. The range is 1 to 3600 seconds.
Syntax
ipv6 mld snooping vlan
no ipv6 mld snooping vlan
vlan-id — Specifies a valid VLAN ID.
•
time — Multicast router present expiration time in seconds. (Range:
•
1–3600)
Default Configuration
The default multicast router present expiration time is 300 seconds.
Command Mode
Global Configuration mode.
User Guidelines
This command has no user guidelines
Example
console(config)#ipv6 mld snooping vlan 2 mcrtrexpiretime 1500
vlan-id
mcrtexpiretime
vlan-id
mcrtexpiretime
IPv6 MLD Snooping Commands
time
547