HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 102

Initial Setup Routine
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Enter no (yes is the default) at the configuration prompt to configure out-of-band management.
Step 7
Continue with Out-of-band (mgmt0) management configuration? [yes/no]: no
Enter yes (yes is the default) to configure the default gateway.
Step 8
Configure the default-gateway: (yes/no) [y]: yes
Enter the default gateway IP address.
a.
IP address of the default gateway: default_gateway
Enter yes (no is the default) to configure advanced IP options such as in-band management, static routes,
Step 9
default network, DNS, and domain name.
Configure Advanced IP options (yes/no)? [n]: yes
Enter yes (no is the default) at the in-band management configuration prompt.
a.
Continue with in-band (VSAN1) management configuration? (yes/no) [no]: yes
Enter the VSAN 1 IP address.
VSAN1 IP address: ip_address
Enter the subnet mask.
VSAN1 IP net mask: subnet_mask
b. Enter no (yes is the default) to enable IP routing capabilities.
Enable ip routing capabilities? (yes/no) [y]: no
c. Enter no (yes is the default) to configure a static route.
Configure static route: (yes/no) [y]: no
d. Enter no (yes is the default) to configure the default network.
Configure the default-network: (yes/no) [y]: no
e. Enter no (yes is the default) to configure the DNS IP address.
Configure the DNS IP address? (yes/no) [y]: no
Enter no (no is the default) to skip the default domain name configuration.
f.
Configure the default domain name? (yes/no) [n]: no
Enter no (yes is the default) to disable Telnet service.
Step 10
Enable the telnet service? (yes/no) [y]: no
Enter yes (no is the default) to enable the SSH service.
Step 11
Enabled SSH service? (yes/no) [n]: yes
Enter the SSH key type (see the
Step 12
would like to generate.
Type the SSH key you would like to generate (dsa/rsa/rsa1)? rsa
Enter the number of key bits within the specified range.
Step 13
Enter the number of key bits? (768 to 1024): 1024
Enter no (no is the default) to configure the NTP server.
Step 14
Cisco MDS 9000 Family Fabric Manager Configuration Guide
2-10
Chapter 2 Installation of Cisco MDS SAN-OS and Fabric Manager
"Generating the SSH Server Key Pair" section on page 39-16) that you
OL-8007-10, Cisco MDS SAN-OS Release 3.x