Configuring Logging - HP V1905 Series Getting Started Manual

Table 116 System Log Severity Levels
Severity
Emergency
Alert
Critical
Error
Warning
Notice
Informational
Debug
This section includes the following topics:

Configuring Logging


 Viewing Logs
Configuring Logging
The Logging Setup Page contains fields for defining which events are recorded to which logs. It contains
fields for enabling logs globally, and parameters for defining logs. Log messages are listed from the highest
severity to the lowest severity level.
Click Administration  Logging  Setup. The Logging Setup Page opens.
Figure 146 Logging Setup Page
The Logging Setup Page contains the following fields:
Level
Highest (0)
1
2
3
4
5
6
7
103
Message
The system is not functioning.
The system needs immediate attention.
The system is in a critical state.
A system error has occurred.
A system warning has occurred.
The system is functioning properly, but a system notice has
occurred.
Provides device information.
Provides detailed information about the log. If a Debug
error occurs, contact Customer Tech Support.