HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 123

Chapter 2 Installation of Cisco MDS SAN-OS and Fabric Manager
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 2-11
Note
Click Finish to close the Cisco Fabric Manager Installer window.
Step 19
If you installed Fabric Manager Server, icons for Fabric Manager and Device Manager are not created
on the desktop until you launch Fabric Manager Client. Follow the instructions in the
Manager Client in Cisco SAN-OS Release 3.2(1) and Later" section on page 5-2
Manager Client.
If you checked the Create shortcuts check box, a Cisco MDS 9000 program group is created under Start
> Programs on Windows. This program group contains shortcuts to batch files in the install directory.
Three services are started: Fabric Manager Server, Database, and Web Server. The Performance Manager
server is installed but the service is not started upon installation, as certain setup steps must be completed
first.
On a UNIX (Solaris or Linux) machine, shell scripts are created in the install directory. The shell scripts
that run the programs equivalent to the Windows services are: FMServer.sh, All server-side data and
Performance Manager data are stored in the install directory.
Fabric Manager Client cannot run without Fabric Manager Server. The server component is downloaded
and installed when you download and install Fabric Manager. On a Windows machine you install the
Fabric Manager Server as a service. This service can then be administered using Services in the
Microsoft Windows Control Panel. The default setting for the Fabric Manager Server service is that the
server is automatically started when the machine is rebooted. You can change this behavior by modifying
the properties in Services.
OL-8007-10, Cisco MDS SAN-OS Release 3.x
Install Complete
If you installed Fabric Manager Standalone, you can choose to launch Fabric Manager or Device
Manager by checking the Launch Fabric Manager or Launch Device Manager check boxes.
Icons for Fabric Manager and Device Manager are automatically created on the desktop.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Installing the Management Software
"Launching Fabric
to launch Fabric
2-31