Logging On And Configuring The Gbe2 Interconnect Switch - HP ProLiant BL p-Class GbE2 User Manual

Logging On and Configuring the GbE2 Interconnect Switch

Do the following to log on to the GbE2 Interconnect Switch.
1. Connect to the GbE2 Interconnect Switch console. After connecting, the login prompt
displays as shown below.
2. Enter admin as the default administrator password.
The Main Menu displays with administrator privileges:
[Main Menu]
>> Main#
To help with the initial process of configuring your GbE2 Interconnect Switch, the software
includes a Setup utility. The Setup utility prompts you step-by-step to enter all the necessary
information for basic configuration of the GbE2 Interconnect Switch. The Setup utility can
also be activated manually from the command line interface any time after login.
Refer to the HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide
for information on how to run the Setup utility, configure the IP address, change
configuration settings, and monitor switch operation using one of the following:
•
Local RS-232 serial console management interface
•
Remote Telnet console management interface
Refer to the HP ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface
Reference Guide for information on how to use the embedded browser-based (HTML)
interface to manage the GbE2 Interconnect Switch from anywhere on the network using a
standard browser, such as Netscape Navigator or Microsoft Internet Explorer.
Appendix F of this guide provides information regarding the SNMP agents. This appendix
also describes how to use the MIBs to configure and monitor the GbE2 Interconnect Switch
using a generic SNMP manager, such as HP OpenView Network Node Manager or Insight
Manager 7.
HP ProLiant BL p-Class GbE2 Interconnect Switch User Guide
HP CONFIDENTIAL Codename: Strawberry Part Number: 331399-001 Last Saved On: 7/17/03 2:22 PM
Enter Password:
info - Information Menu
stats - Statistics Menu
cfg - Configuration Menu
oper - Operations Command Menu
boot - Boot Options Menu
maint - Maintenance Menu
diff - Show pending config changes
apply - Apply pending config changes [global command]
save - Save updated config to FLASH [global command]
revert - Revert pending or applied changes [global command]
exit - Exit [global command, always available]
Setting Up and Installing the GbE2 Interconnect Switch
[global command]
2-13