Chapter 7
Fabric Manager Web Server
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Select one of the fabrics to display VSAN inventory information for that fabric.
Step 2
There are variations to this procedure. In addition to these basic steps, you can also:
Note
•
Viewing Detailed Information for Switches
To view detailed inventory information about switches using Fabric Manager Web Server, follow these
steps:
Choose Inventory > Switches.
Step 1
You see the Switches tab shown in
Figure 7-17
Do one of the following:
Step 2
•
•
•
OL-8007-10, Cisco MDS SAN-OS Release 3.x
Select the status level, then click Filter to filter the display to show all VSANs or just those with
errors.
Switches Tab
Select a SAN to display switch inventory information for all fabrics in the SAN.
Select one of the fabrics to display switch inventory information for that fabric.
Expand a fabric and select one of the VSANs to display switch inventory information for that
VSAN.
Figure
7-17.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Inventory
7-23