Caller Id Call Logging And Dialing (F23) - Avaya PARTNER ACS Installation And Use Manual

A user at a covering extension who has a system display telephone and who is busy on a call
I
can use Caller ID Inspect to view the number of the extension from which a Call Coverage
call is being sent.
Programming
To program a Caller ID Inspect button:
f00
1. Press
2. Press a programmable button with lights.
f17
3. Press
4. Program another button for this extension, or exit programming mode.
Using Caller ID Inspect
To use Caller ID Inspect:
1. While active on a call, press the programmed button.
The green light flutters. Caller ID Inspect is activated.
2. Press a line, pool, or
The Caller ID or Call Coverage information for the selected line, pool, or intercom is
displayed.
3. Press the programmed button to deactivate the feature.
The feature is deactivated automatically if you hang up the handset or press any button other
than a line, pool, or

Caller ID Call Logging and Dialing (F23)

Once the system administrator assigns the Caller ID Call Log Line Association, Caller ID Log
Answered Calls, and/or the Caller ID Log All Calls features to log Caller ID calls, you use Caller
ID Logging and Dialing (F23) on Release 2.0 or later systems to view the log. Caller ID Call
Logging and Dialing is available on system display telephones for all lines for which you
subscribe to a Caller ID service. Use this feature to view Caller ID information for central office
calls.
You must program Caller ID Logging and Dialing onto a line button with LEDs to use
the feature.
Up to 400 call records can be stored for the system. Each line associated with an extension to log
Caller ID calls is guaranteed a minimum of 20 call records.
You also can automatically dial the number stored in the log.
.
.
i
button.
i button. The green light is off when the feature is deactivated.
Programming & Using Telephone Features
Caller ID Features
8-19