Call Screening (F25)-Release 3.0 Or Later; Using Call Pickup On A System Telephone; Using Call Pickup On A Single-Line Telephone - Avaya PARTNER ACS Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use

Using Call Pickup on a System Telephone

1. Lift the handset.
2. Press the programmed button, or press
at which the call is ringing or parked.

Using Call Pickup on a Single-Line Telephone

1. Lift the handset.
You hear intercom dial tone.
6
2. Dial plus the two-digit number of the extension at which the call is ringing or parked.
Call Screening (F25)–Release 3.0 or Later
Call Screening allows you to listen to a caller leaving a message in your mailbox. This feature
applies only if you have a voice messaging system and an MLS or PARTNER system telephone.
This feature is not available on tip/ring telephones.
SECURITY ALERT:
Use Station Lock (F21) to prevent misuse of this feature. If Station Lock is activated, Call
Screening does not work.
You must program Call Screening on a line button with LEDs by using Centralized Telephone
Programming. Once the button is programmed, the user can turn the feature on by pressing the
button. Calls are now screened until the user turns the feature off by pressing the button again.
When the feature is on, Call Screening begins once the voice mail system has answered the call.
While the call is being screened, the user is connected to the call in a listen-only mode on the
speakerphone. The user can hear both the outgoing announcement and the incoming caller
leaving the message.
One call can be screened at a time at an extension. If more than one call is ringing, the system
uses the ringing line order procedure to determine which of the eligible calls to screen.
Once Call Screening begins, the user can:
Answer the screened call by going off-hook on the handset. This causes voice mail to drop off
I
the call.
Turn the feature off by pressing the Call Screening button again. The telephone drops off the
I
call, but the voice mail system does not drop off the call.
Answer or place another call. This causes the telephone to drop off the call.
I
Call Screening (F25)–Release 3.0 or Later
8-16
i6
and the two-digit number of the extension