Avaya PARTNER ACS Installation And Use Manual page 241

Dialing Instructions
To dial the telephone number and return the call from the display:
1. Press the Dial button on either the Telephone Number Display or the Name Display. When
you press the Dial button on either display, the Dial Display appears (see
Select
1
Figure 8-6. Call Log Dial Display
2. For Release 2.0 systems only, if you want to make an outside call by using a specific pool,
press the idle pool button, or press
882, or 883). If desired, lift the handset.
3. The button you press to dial the call depends on the number of digits you must dial to complete
the call from your area:
To dial the complete number including the 1, press the button under the 1 (left button).
I
To include the area code but not the 1, press the button under the area code (the second
I
button).
To dial the seven-digit number only, press the button under the seven-digit telephone
I
number displayed (the third button).
You also have the following options at the Call Log Dial display:
Press the Back button to return to the Telephone Number or Name Display.
I
Press the Call Log Display button to exit the Call Log.
I
The green light goes off when the feature is deactivated.
a Button
908 5551234
i plus the three-digit pool access code (880, 881,
Programming & Using Telephone Features
to Dial:
Back
Figure 8-6).
Caller ID Features
8-25