Direct Line Pickup Features; Using Contact Closure On A Single-Line Telephone; Direct Line Pickup-Active Line (I68Ll) - Avaya PARTNER ACS Installation And Use Manual

Using Contact Closure on a Single-Line Telephone

To activate a Contact Closure:
1. Pick up the handset to get an intercom dial tone.
#41
2. Press
3. If the Contact Closure Operation Type for that Contact Closure is set to Toggle, repeat
Steps 1 and 2 to deactivate the Contact Closure.

Direct Line Pickup Features

With the Direct Line Pickup features, you can access a ringing or held call or a call in progress.
You can also select a line to use that is not assigned to your telephone. The Direct Line Pickup
features are:
Direct Line Pickup–Active Line
I
Direct Line Pickup–Idle Line
I
Direct Line Pickup–Active Line (I68LL)
Use this feature to access a ringing or held call, or to join a call in progress on a specific outside
line (where LL is a system line number).This feature is useful for picking up a ringing or held call or
for joining a call on a line that is not assigned to the telephone.
Considerations
This feature is useful when you are requested or paged to pick up a call on a specific line that
I
does not appear on your telephone.
You cannot access conference calls by using this feature.
I
You can program a Direct Line Pickup–Active Line button on a system telephone to pick up
I
a line by pressing the button and then dialing the two-digit line number.
If a line is idle, you cannot access it with this feature (you hear busy tone). For information
I
about accessing an idle line, see
If Line Access Restriction or pool Access Restriction is set to No Access or Out Only for a
I
line assigned to an extension or lines within a pool, a user at the restricted extension hears
busy tone if Direct Line Pickup is used to answer a call on that line when the line is ringing at
another extension. The user can join a call or access a held or transferred call on the line.
You cannot use Direct Line Pickup to access an active call at an extension that has Privacy
I
activated or that is part of a Conference Call, or to access a held call at an extension that
used Exclusive Hold.
(for Contact Closure 1) or
"Direct Line Pickup–Idle Line (I8LL)" on page
Programming & Using Telephone Features
#42
(for Contact Closure 2).
8-30.

Direct Line Pickup Features

8-29