Doorphone Programming; I Doorphone Alert Extensions (#606) - Avaya PARTNER ACS Installation And Use Manual

5. If the scanner has an auto answer feature, turn it off.
6. Repeat Steps 1—5 for each additional scanner.

Doorphone Programming

When a person uses the doorphone, it signals all alert extensions at the same time. If the alert
extension is a system telephone, the call signals with a unique ding-dong sound to distinguish it
from other calls. If you have two doorphones, they signal with different tones so you can
distinguish between them.
To use the doorphone functionality, program the following features:
Doorphone Alert Extensions
I
Doorphone Extension
I
Doorphone Alert Extensions (#606)
Use this feature to identify extensions that are signaled when a doorphone button is pressed.
Considerations
You cannot bridge two doorphones together.
I
If Do Not Disturb is active at a doorphone alert extension, the person at the doorphone hears
I
signaling, but the alert extension is not signaled.
If a Contact Closure on the Contact Closure Adjunct controls a door lock, consider
I
assigning the Doorphone Alert Extensions to the Contact Closure Group (#612) for that
Contact Closure. Only extensions assigned to that Contact Closure Group can activate the
door lock.
Programming
To identify doorphone alert extensions:
1. Press f00ss#606
2. Enter the first alert system extension number.
D
3. Press
1 = Not an Alert Extension (the factory setting) ✔
I
2 = Doorphone 1 Alert Extension
I
3 = Doorphone 2 Alert Extension
I
4 = Doorphones 1 and 2 Alert Extension
I
until the appropriate value appears:
Using Auxiliary Equipment
at extension 10 or 11.

Doorphone Programming

9-13