Avaya PARTNER ACS Installation And Use Manual page 160

®
PARTNER Advanced Communications System Installation, Programming, and Use
Feature
+
–
Conf
Mic/
Transfr
HFAI
Spkr Hold
Figure 6-1. PARTNER-34D Telephone
The following buttons and indicators appear on system telephones:
Display (PARTNER-34D and PARTNER-18D telephones only). The display shows the
I
following:
– Date, day, and time when the telephone is idle
– Number dialed when placing a call
– Extension number (and name if programmed) calling you or transferring a call to you
– Duration while a call is in progress
– During programming, the settings, options, and prompts
To adjust the display contrast on the PARTNER-34D and PARTNER-18D telephones, press
-
then to decrease the brightness or
and the handset is in the cradle.
Caller ID is available on all lines for which you subscribe to Caller ID service. Caller ID
information is the caller's telephone number (and name, if available). When active on a call,
you automatically receive Caller ID information for the duration of the call. When an extension
is idle, you receive Caller ID information for a call coming in to your extension.
In Release 4.0 and later systems, you receive both the caller's number and name on
a two-line display telephone while the call is ringing.
System Telephones
6-2
PARTNER-34D
Ext.
Intercom Intercom
Feature
+
1
GHI
–
Conf
4
Mic/ PQRS
Transfr
7
HFAI
Spkr Hold
*
+
to increase the brightness, while the telephone is idle
Display
Programmable Buttons
(4 without lights)
Line/Programmable
Buttons
(32 with lights)
Intercom Buttons
Message
Message Light
ABC DEF
2 3
JKL MNO
5 6
TUV WXYZ
8 9
#
0
(2)
*