Considerations; Programming - Avaya PARTNER ACS Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use

Considerations

If an extension has Call Coverage and VMS Cover active, covered calls ring at the covering
I
extension for the specified number of Call Coverage Rings:
– If the covering extension does not answer, the call is routed to the voice mailbox of the
extension that activated Call Coverage after the specified number of VMS Cover Rings
(#117) or (#321).
– If the covering extension has Do Not Disturb active, the call is routed immediately to the
voice mailbox of the extension that activated Call Coverage.

Programming

For Call Coverage Rings (#116)–Release 2.0 only
To change the number of times a call rings at an extension before it is sent to the covering
extension:
1. Press f00ss#116
2. Enter the number of the extension to be programmed.
3. Enter a different setting (1—9; 2 is the factory setting).
4. To program another extension, press
on the display. Then repeat step 3.
5. Select another procedure, or exit programming mode.
For Call Coverage Rings (#320)–Release 3.0 or Later
f00ss#320
1. Press
The current ring setting displays.
2. Enter the number of the extension to be programmed.
D
3. Press
4. To program another extension, press
on the display. Then repeat step 3.
5. Select another procedure, or exit programming mode.
Call Coverage Rings (#116 or #320)
4-8
n
until the appropriate value appears (1—9; 2 is the factory setting).
n
at extension 10 or 11.
p
or until the extension number appears
at extension 10 or 11.
p
or until the extension number appears