Credit Card Scanners; Using Credit Card Scanners; Programming Credit Card Scanners - Avaya PARTNER ACS Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use

Credit Card Scanners

Many retail businesses and restaurants use credit card scanners to get instant approval of credit
card purchases. The system allows your credit card scanners to share the lines in your system (as
shown in Figure 9-7). You can install the credit card scanner on an extension by itself, or combine
it with a telephone on the same extension (see
Figure 9-7. Credit Card Scanner

Using Credit Card Scanners

When you make a call on the credit card scanner, an outside line is automatically selected. If you
combine the credit card scanner with a telephone, you cannot use the telephone while the credit
card scanner is operating.

Programming Credit Card Scanners

To program the system for a credit card scanner:
1. Do one of the following:
If extension X is a key extension, use Line Assignment (#301) to assign the lines you
I
want the scanner to use to extension X.
If extension X is a pooled extension, use Pool Extension Assignment (#314) to assign
I
the pools you want the scanner to use to extension X. Also use Line Assignment (#301)
to assign any individual lines you want the scanner to use to extension X.
2. Set Automatic Line Selection for extension X to select the pools and outside lines that the
scanner is to use.
3. Set Automatic Extension Privacy (#304) for extension X to Assigned.
4. Make sure extension X is not assigned as a Call Waiting (#316) extension.

Credit Card Scanners

9-12
"Combination Extensions" on page
Lines
CONTROL
UNIT
Ext
X
Telephone
(optional)
Ext.
Message
Intercom Intercom
+ Feature ABC DEF
1 2 3
GHI JKL MNO
– Conf
4 5 6
Mic PQRS TUV WXYZ
Transfr
HFAI 7 8 9
Spkr Hold * 0 #
Credit
Card
Scanner
9-2).