Direct Line Pickup-Idle Line (I8Ll) - Avaya PARTNER ACS Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
Calls picked up with this feature get Caller ID information, unless Line Access Restriction or
I
Pool Access Restriction is used to prevent users at specific extensions from viewing Caller
ID for ringing calls.
Programming
To program a Direct Line Pickup–Active Line button:
f00
1. Press
2. Press a programmable button.
i68
3. Press left
4. Program another button for this extension, or exit programming mode.
Using Direct Line Pickup–Active Line on a System
Telephone
To use Direct Line Pickup–Active Line on a system telephone:
1. As desired, lift the handset.
2. Do one of the following:
Press a button programmed with Direct Line Pickup–Active Line, and dial the two-digit
I
system line number of the line you want to pick up or join
i68
Press
I
If you did not lift the handset, the speaker comes on automatically.
Using Direct Line Pickup–Active Line on a Single-
Line Telephone
To use Direct Line Pickup–Active Line on a single-line telephone:
1. Lift the handset.
You hear intercom dial tone.
68
2. Dial and the two-digit system line number of the line you want to pick up or join.
Direct Line Pickup–Idle Line (I8LL)
Use this feature to access a specific outside line (where LL is a system line number) when the line
is not in use. This feature is useful for accessing a line that is not assigned to the telephone.
Considerations
This procedure applies to individual lines. If you have a pooled extension and you want to
I
access lines in pools that are not assigned to your extension, dial the pool access code at the
intercom dial tone.
Direct Line Pickup Features
8-30
.
.
and the two-digit line number.