Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
1
Install and Cable the Cabinet
Install the Avaya IP600 system cabinet
Install the Avaya IP600 system cabinet
!
WARNING:
Make sure there is adequate ventilation in the area. The internal room temperature
must not exceed 50
Avaya IP600 cabinets can be floor-mounted or rack-mounted. Set the Carrier
Address ID either before or after installing each RMC.
!
WARNING:
It is very important to align the cabinet with the correct holes in the frame because the
distance between each varies. To aid your installation of the rack-mounted cabinet,
print a copy of the IP600 Mounting Template provided on this CD. Print the template on
11" x 17" paper, so you can use it as an actual template.
Verify the carrier address ID on RMC cabinets
1. Loosen the thumb screws on the fan assembly and pull it straight out as
shown in
Figure 1-3. Fan assembly removal
o
o
C (122
F).
Figure
1-3.
fndpremv LJK 102600
Issue 6
December 2001
1-11