Avaya PARTNER ACS Installation And Use Manual page 206

®
PARTNER Advanced Communications System Installation, Programming, and Use
If you have a voice messaging system, VMS Hunt Schedule (#507) determines when outside
I
calls should ring the VMS Hunt Group (always, day only, or night only). The status of the
Night Service Button at extension 10 tells the voice messaging system to operate in day or
night mode.
The Night Service Button returns to the status (on/off) it was in immediately prior to a power
I
failure or to System Reset (#728) being used.
Programming
To program a Night Service Button at extension 10:
f00ss#503
1. Press
2. Do one of the following:
If you want to assign Night Service to the first available button, press
I
display similar to the following appears:
Night Service Button
1 Assigned - Ext10
If you want to remove the Night Service Button assignment, press
I
display similar to the following appears:
Night Service Button
2 Not Assigned (the factory setting) ✔
If you want to assign Night Service to a specific button, press
I
following appears:
Night Service Button
3 Select a Button
Then press a programmable button with lights to assign Night Service to that button.
3. Select another procedure, or exit programming mode.
4. Label the Night Service Button at extension 10.
Using the Night Service Button
To turn Night Service on:
1. Press the Night Service Button at extension 10.
If a System Password is programmed, the green light next to the button flashes; you must
I
continue with Step 2.
If no System Password is programmed, the green light is on steady and Night Service is
I
on.
2. Enter the password.
The green light is on steady. Night Service is on.
Night Service Button (#503)
7-16
at extension 10.
D
D
3
. A display similar to the
until a
until a