Doorphone Extension (#604 And #605) - Avaya PARTNER ACS Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
4. To identify another alert extension, press
appears on the display, then repeat Step 3.
5. Select another procedure, or exit programming mode.

Doorphone Extension (#604 and #605)

Use these features to identify an extension to which a doorphone is connected. A doorphone is
usually placed near an entrance, to screen visitors. You can connect up to two doorphones to the
system–use Doorphone 1 Extension (#604) to identify the extension for the first doorphone and
Doorphone 2 Extension (#605) to identify the extension for the second doorphone.
Considerations
An extension cannot be used for a doorphone and a hotline at the same time. However,
I
hotlines and doorphones can have the same alert extensions.
You should not assign doorphones to extension 10, 11, or to the first two extensions of any
I
308EC or 206 modules.
Remove voice messaging system mailboxes from doorphone extensions.
I
You cannot bridge two doorphones together.
I
To prevent outside calls from being made or received on the doorphone, use Line
I
Assignment (#301) to remove all outside lines and/or Pool Extension Assignment (#314) to
remove all pools from the doorphone extension. (Automatic Line Selection for the
doorphone extension will be automatically set to select intercom lines first.)
You can use Message Light On with the doorphone (for example, the doorphone's light
I
flashes as a prearranged signal to a delivery person) provided the doorphone is connected to
a processor module or to a Release 3.0 or later 206 module.
Programming
To program a doorphone extension:
f00ss#604
1. Press
doorphone 2) at extension 10 or 11.
2. Enter the doorphone two-digit extension number, or press
doorphone extension.
3. Select another procedure, or exit programming mode.
Doorphone Programming
9-14
n or p until the extension number
for doorphone 1 (or
r
#605
for
to unassign an existing